How to Fix Possible IP Address Errors

How to Fix Possible IP Address Errors

An IP address is a collection of digits that is separated by periods. IP addresses are expelled as in a set of four numbers. From 0 to 255, each number in the collection can be ranged. is the range of an IP address. 
They are mathematically allocated and produced by the Internet Assigned Number Authority (IANA), a division of the Internet Corporation for Assigned Names and Numbers (ICANN). 

Each time someone registers a domain on the internet, they pay a small fee to ICANN to register their domain. 
Want to know more about the ways in which you can login into the Local Area Network (LAN) with your existing IP Address of Click for source here, and go through the detailed guide we have on our website. 
Two devices would never have the same IP address. But in the practical world, errors are always there. Sometimes because of the malfunctions of the router, two or more devices may end up having the same IP address because of the malfunctions of the router, PC settings, or even because of issues with your ISP. When this happens, the OS will tell you that more than one device has the same IP address, which will lead to network and communication errors. This is when you get the error that says, “Windows has detected an IP address error.” The error prevents the device from connecting and communicating to the network, so you must fix it immediately. This is a very common error, so there are ways you can improve it easily. Visit ipv4 for lease issues.

Solution 1- Restart Your Router

The router is responsible for assigning the IP address; in some cases, the router fails to give a unique IP to the device, resulting in the error.
1.Turn off your router using the power button, which will disconnect you from the internet and shut down the network temporarily.
2.Wait for some minutes, usually 5 min.
3.Turn your router back on.

You might need to re-connect your devices to the network.

Solution 2 – Re-enable your network adapter

There could be a problem with the network adapter; it can either be a USB or a wireless one. Disabling and re-enabling the adapter in windows can fix the error. But you’ll be required to have a local user with administrative permissions to perform this method.

1. Press and hold on the Windows key and then press R on your keyboard. This will open the Run utility.
2. Type in ncpa.cpl and click on the OK button. This will open up the Network connections Network.
3. Disable the router you are using, using the right-click button.
4. Re-enable the same adapter using the right-click button.
5. Restart your device and try to check if the IP error is still happening.

Solution 3: Renew Your IP Address.

It’s one of the best methods when it comes to network problems, especially with IPs. Release your current IP and prompt the router to assign a new IP Address to your device using the commands, fresh IP to your device. You need to have administrative permissions to perform this method.
1. Open the command prompt
2. In the prompt window, type the following commands. Make sure to press enter after each one:
a. netsh int IP reset c:\resetlog.txt
b. ipconfig /release
c. ipconfig /renew

Solution 4- Remove static IP

Static IP means that the address your computer is using was manually set. This can cause an error on your network. If you’re unsure about the ways to remove your Static IP, follow this link. Try using an automatic IP instead.
1.Type ncpa.cpl in the Run utility and press OK. This will open the network connections window.
2. Right-click on the adapter you are using from the connections window, then select properties.
3. Double click on (IPV4/TCP).
4. Select both to obtain the IP address automatically and obtain the DNS server address automatically from the general tab.
5. Click OK and restart your computer.

Solution 5- Update your Network Card Driver

An outdated driver can cause trouble with the networks as well. There are some ways to update your drivers.

Method 1: Update your driver from the window itself.

1. Type devmgmt.msc and hit OK to open the device driver.
2. Right-click on your adapter in the Network adapter section.
3. Click on the Search automatically option for updated driver software.
4. If windows can find an updated driver, it will automatically download and install the update to your computer.
5. Restart your PC.

Method 2: Update your driver using third-party apps.

There are some third-party apps you can use to update your drivers, such as driver booster, driver hub, etc. These tools and softwares are free and easy to use.

Solution 6- Disable IPv6

Being a new technology, IPv6 sometimes can cause errors. Given below are steps to fix it. You can choose either to disable IPv6 protocol or you can carefully follow the steps given below to fix it.
1.Type ncpa.cpl in RUN utility. It will open the Network Connections window.
2. Right-click on your adapter, select properties.
3. Detach the checkmark from Internet Protocol Version 6 (TCP/IPv6). This process will disable 
the use of IPv6 on your device.
4. Restart Your PC and check if the problem is resolved.

We hope these methods will get rid of your IP address Problems.
Next Post »